PC-Gadget-Human Technology Review

The motherboard is an important tool that we build a computer, because all the components on the motherboard we installed computer, from the processor, memory (RAM), VGA Card and port-port support peripherals. The motherboard consists of a variety of different critical components, including South Bridge and North Bridge.

North Bridge tasked to set up the data traffic going between the processor, memory (RAM) and the VGA card (either onboard or addon), while the South Bridge tasked to set up the data path between the port peripherals connected to the motherboard and the PCI. All functions are controlled by the motherboard a small software that is embedded in the chip with the motherboard called the BIOS (Basic Input Output System). In fact update the motherboard BIOS is not required when all computer components, we can work well, if you update often required upgrading your computer components with a new, sometimes the new component is not fully supported by the motherboard. Motherboard vendors usually issue a bios update regularly. With a BIOS update, the compatibility of the components can be more awake.

The steps necessary to update the motherboard BIOS is to prepare a USB Flashdisk and of course the BIOS file below BIOS flash program for your motherboard. Motherboard BIOS can be obtained from the official website you motherboard. After all preparation is complete, follow these steps:

1. Download HP USB Disk Storage Format Tool in http://files.extremeoverclocking.com/file.php?f=197

2. Download Windows 98 System File in http://files.extremeoverclocking.com/file.php?f=196

3. Install HP USB Disk Storage Format Tool and extract the Windows 98 System File C: \

4. Enter USB Flashdisk, then run the HP USB Disk Storage Format Tool.

5. Select Create a DOS Start Up Disk, click Using System Located At DOS.

6. In the browse window, select the directory extract the Windows 98 System File.

7. Click Start unutk start the format process, wait until finished.

8. Copy the BIOS file and BIOS flash program (awdflash) into your USB Flashdisk, and then restart the computer.

9. Change the boot sequence in the BIOS boot order to make the beginning of USB Flashdisk, After boot you will be entered in the DOS mode.

10. Type C: \> awdflash nama_bios.bin / cks / sn / py / cc / cd / cp / ld / qi / WB, and then press Enter to begin the process of flash BIOS.

After following the steps above, now you have the motherboard with updated BIOS . With the update BIOS, the motherboard you will be able to work better than before the update.